Xenon Flash Lamp
$0.00
The HPX-2000 is ideal for reflectance or fluorescence spectroscopy applications where often a strong source is required. The light has a 35 W xenon source and features an integrated filter holder to condition the light before it enters the fiber optic.
The HPX-2000 has an integrated shutter that can be controlled by a TTL signal or a switch on the front panel, allowing you to limit the exposure of the sample to this high-intensity source.
- UV to NIR response -- provides output from 185 nm-2000 nm (2.0 µm)
- High power source -- nominal bulb power is 35 W
- Integrated shutter -- helps to protect light-sensitive samples
- Built-in filter holder -- accommodates filtering of light before it enters the fiber optic aperture
The HPX-2000-HP-DUV light source is much more intense, especially in the UV region. Driven by a 75 W source, the HPX-2000-HP-DUV provides output intensity that is almost 4x higher across the entire range compared to the output of the HPX-2000.
The HPX-2000-HP-DUV has an integrated shutter that can be controlled by a TTL signal or a switch on the front panel, allowing you to limit the exposure of the sample to this high-intensity source.
- UV to NIR response - provides output from 185 nm-2000 nm (2.0 µm)
- Extra high power source - nominal bulb power is 75 W
- Integrated shutter - helps to protect light-sensitive samples
- Built-in filter holder - accommodates filtering of light before it enters the fiber optic aperture
HPX-2000
Engineering:
Wavelength Range: 185nm – 2μm
Source: HPX-2000 Xenon Light Source
Nominal Bulb Power: 35 W
Typical Output Power: 1.52 mW
Source Lifetime: 1,000 hours
Warm-up Time: 25 minutes
Physical:
Shutter: Yes
Fiber Connector: SMA 905
Dimensions: 14.5 x 16.5 x 26 cm
Integrated Filter Holder: Yes
Power Consumption: 50 W
Trigger/Shutter Input Connection: SUB-D-15 pin
Trigger/Shutter Input Signal: TTL; Up to 2.5 Hz maximum
Weight: 6 kg
Power Requirements: 85-264 V, 50/60 Hz
Environmental:
Safety & Regulatory: CE, VDI/VDE 0160, EN 61010
Operating Humidity Specification: 5-95% without condensation at 40°C
Operating Temperature: 5 °C – 35 °C
HPX-2000-HP-DUV
Engineering:
Wavelength Range: 185nm – 2μm
Source: Continuous Xenon
Nominal Bulb Power: 75 W
Typical Output Power: 6.13 mW
Source Lifetime: 1,000 hours
Warm-up Time: 30 minutes
Physical:
Fiber Connector: SMA 905
Dimensions: 14.5 x 16.5 x 26 cm
Integrated Filter Holder: No
Power Consumption: 105 W
Trigger/Shutter Input Connection: SUB-D-15 pin
Trigger/Shutter Input Signal: TTL; Up to 2.5 Hz maximum
Weight: 6 kg
Power Requirements: 85-264 V, 50/60 Hz
Environmental:
Safety & Regulatory: CE, VDI/VDE 0160, EN 61010
Operating Humidity Specification: 5-95% without condensation at 40°C
Operating Temperature: 5 °C – 35 °C
