Stainless Steel Dip Probe
$0.00
Transmission dip probes couple to Spectrecology spectrometers and light sources to measure absorbance and transmission in solutions. These stainless steel probes are great for embedding into process streams for real-time sample monitoring.
In a transmission dip probe, light is transmitted from the illumination fiber through a plano-convex lens for collimation, after which it passes through the open probe tip to a flat, second-surface mirror at the tip of the probe. The light reflects from this mirror and is focused onto the read fiber within the probe ferrule.
- Probe options - versions for general lab use and harsh environments
- Sampling - sample is free to flow through the probe tip
- Pathlength - vary the pathlength of your probe tip (2 mm, 5 mm, or 10 mm) for solutions of different concentrations
- Simple mounting - probe fits into a standard 1/4″ Swagelok fitting for installation into a pipe or reactor
T300-RT-UV-VIS
Engineering:
Fiber Core Size: 300 µm
Jacket: PVDF zip tube
Length: 2 m
Wavelength Range: 200nm – 1.1μm
Probe Ferrule Diameter: A6.35 mm (1/4″)
Breakout: 1.5 meters from the end of the probe
Connector: SMA 905
Pathlength: 2, 5 or 10 mm
Physical Resistance: 100 psi
Probe Ferrule Length: 127 mm
Probe Ferrule Material: Stainless steel outer sleeve, aluminum second surface mirror
Temperature Limit: Up to 100º C without sleeve
T300-RT-VIS-NIR
Engineering
Fiber Core Size: 300 µm
Jacket: PVDF zip tube
Length: 2 m
Wavelength Range: 400nm – 2.1μm
Probe Ferrule Diameter: A6.35 mm (1/4″)
Breakout: 1.5 meters from the end of the probe
Connector: SMA 905
Pathlength: 2, 5 or 10 mm
Physical Resistance: 100 psi
Probe Ferrule Length: 127 mm
Probe Ferrule Material: Stainless steel outer sleeve, aluminum second surface mirror
Temperature Limit: Up to 100º C without sleeve